5164 Front Panel, Front End
5164 TIGHTENING TORQUE OVERVIEW
| Bottom automatic air flap control | ||
| Tightening torque | 2.8 Nm | |
| Front cross connection | ||
| screw | Tightening torque | 11.8 Nm |
| Front-end strut/strut brace |
||
| Screw Replace screw. |
Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Front-end strut to cross connection | ||
| Hexagon screw Replace screw. |
Joining torque | 28 Nm |
| Angle of rotation | 90° | |
| Front reinforcement strut | ||
| screw Replace screws. |
Tightening torque | 19 Nm |
| Front Y-strut to cross connection and/or bumper bracket | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Heat insulation to front end | ||
| screw | Tightening torque | 3 Nm |
| Sheet metal nut | Tightening torque | 2.5 Nm |
| Hood lock support to support for bumper cover and/or to top rear cross connection | ||
| M8x25 | Tightening torque | 19 Nm |
| Torx bolt | Tightening torque | 19 Nm |
| Hexagon screw M8 | Tightening torque | 19 Nm |
| Rear top cross connection to wheel arch carrier support | ||
| Torx screw M8x30 | Tightening torque | 19 Nm |
| Torx screw M10x40 | Tightening torque | 19 Nm |
| Top automatic air flap control. | ||
| Tightening torque | 4 Nm | |
| Top front cross connection to hood lock support | ||
| screw | Tightening torque | 19 Nm |
| Top rear connection to body | ||
| Torx screw M8x30 | Tightening torque | 19 Nm |