Install the stiffening plate
- Position stiffening plate (1) .
- Replace screws (2)
.
Parts: Screws
- Tighten down screws (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Thrust field to front axle support | ||
|---|---|---|
| M8 Replace screws. |
Joining torque | 25 Nm |
| Angle of rotation | 70° | |
- Tighten down screws (3) .
TIGHTENING TORQUE SPECIFICATIONS
| Cover, steering unit | ||
|---|---|---|
| screw | Tightening torque | 3 Nm |
- Tighten down screws (4) .
TIGHTENING TORQUE SPECIFICATIONS
| Underbody protection | ||
|---|---|---|
| screw | Tightening torque | 3 Nm |
Follow-up work