Removing both track end rods

Removing the tie rod end 

• Unfasten nut (1)  .
  NOTE: If necessary, counter-hold at the Torx socket.
• Release the tie rod end (2)  from the swivel bearing.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Determine dimension (A) to simplify the following toe adjustment on the front axle.
• Slacken screw (1)  .
• Unscrew tie rod end.
  NOTE: If necessary, hold the track rod with an opened spanner for counter support.

Courtesy of BMW OF NORTH AMERICA, INC.