LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2016
>>
740i
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 4)
>>
Fastening the banjo bolt for the coolant feed line to the exhaust turbocharger of cylinders 1 to 4
Fastening the banjo bolt for the coolant feed line to the exhaust turbocharger of cylinders 1 to 4
Replace sealing rings.
Parts
: Sealing ring
Tighten the banjo bolt (1).
TIGHTENING TORQUE SPECIFICATIONS
Banjo bolt for coolant line on exhaust turbocharger
M14x1.5
Replace sealing rings.
tightening torque
35 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.