Installing the exhaust turbocharger for the cylinders 1 to 4

• Replace the seal and the V-ribbon clip (1)  .

  Parts:  Seal, V-ribbon clip

• Prior to installing the exhaust turbocharger: Position the banjo bolt of the coolant feed line.
• Position V-clip (1)  .
• Tighten down screw (2)  .

TIGHTENING TORQUE SPECIFICATIONS

Exhaust turbocharger to exhaust manifold
V-ribbon clip Replace V-ribbon clip.	tightening torque	13 Nm

Courtesy of BMW OF NORTH AMERICA, INC.