Install door lock

• Guide in the door lock (2)  together with the outer door handle support.
• Connect the connector on the door lock (2)  .
• Tighten down screws (3)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door lock to door
  screw	Tightening torque	8.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (4)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door lock to door
  screw	Tightening torque	8.8 Nm

• Clip in locking rod (1)  .
• Connect the connector to the drive for the soft-close automatic function (1)  .
• Fasten the drive for the soft-close automatic function (1)  on the door.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Outside door handle support to door
  screw	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the attachment hood (2)  .
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
• Refer to INSTALLING THE MODULE BRACKET ON THE FRONT OF THE DOOR (PART INSTALLATION) .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE DECORATIVE STRIP ON THE DOOR TRIM PANEL .
• Refer to INSTALLING THE MIRROR TRIANGLE COVER .
• Refer to INSTALLING THE WEATHER STRIP ON THE FRONT DOOR  .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .