Condition for fault identification

Other voltage related preconditions:

• Supply voltage between 9 V and 16 V.

Temperature related-precondition:

• Coolant temperature higher than limit value and coolant temperature at engine start lower than limit value
• Ambient temperature higher than limit value

Coolant temperature limit: 30 deg C

Coolant temperature limit, engine start: TMSTDTE

Ambient temperature limit: 3.75 °C

Time related-precondition:

• None

Other preconditions:

• Engine on.
• Driving speed greater than 30 km/h
• low partial load
• Engine speed lower than limit value: 2, 400 RPM

Terminal status:

• Terminal 15 on.

Preparation for transport Active

Terminal 15 on