51 17 Flaps
TIGHTENING TORQUE SPECIFICATIONS - FLAPS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Hinge to water channel | E64/F12 | Combination oval-head machine screw | 21 Nm | |
| 2AZ | Hinge to water channel | E64/F12 | Hexagon nut and washer assembly, microencapsulated | 21 Nm | |
| 3AZ | Hinge to convertible top compartment lid | E64 | Multi-purpose bolt | 8.8 Nm | |
| 4AZ | Hinge to convertible top compartment lid | E64/F12 | Multi-purpose bolt (ISA), self-locking | 8 Nm | |
| 5AZ | Striker on soft top | E64 | 8.8 Nm | ||
| F12 | 8 Nm | ||||
| 6AZ | Kinematics box to body | E64 | 8 Nm | ||
| 7AZ | Bracket for drive cylinder | E64/F12 | 8 Nm | ||
| 8AZ | Stop buffer, convertible-top compartment lid | E64 | 8 Nm | ||
| 9AZ | Soft top compartment lid cover | E64 | Combination hexagon nut | 4.6 Nm | |
| 10AZ | Soft top compartment lid cover | E64/F12 | Hexagon nut | 4.6 Nm | |
| 11AZ | Protective cover on sidewall | E85/E86 | 3 Nm | ||
| 12AZ | Trim strip on soft top compartment lid cover | F12 | 3 Nm | ||