SI number

01 18 08 (482)

Consisting of:

Fig 1: Identifying Tool (0496530)

Courtesy of BMW OF NORTH AMERICA, INC.

1. 1 = 0496540  Tool
   NOTE: (Bottom yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
2. 2 = 0496541  Tool
   NOTE: (Top yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
3. 3 = 0496542  Die-plate
   NOTE: (Cutting matrix) bottom for F01/F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
4. 4 = 0496543  Tool
   NOTE: (Cutting punch) top for F01/F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
5. 5 = 0496544  Washer
   NOTE: (Thrust washer) Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
6. 6 = 0496545  Nut
   NOTE: (Wing nut) M12 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
7. 7 = 0496546  Template
   NOTE: For rear door trim F01 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
8. 8 = 0496547  Template
   NOTE: For rear door trim F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
9. 9 = 0496548  Tool
   NOTE: (Arc punch) size 12 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
10. 10 = 0496549  Outpusher
    NOTE: (Ejector) For removing residual punched portions from cutting matrix. Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
11. 11 = 0496550  Hexagon socket
    NOTE: (Hexagon socket wrench) 6 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530).
12. 14 = 0496784  Tool
    NOTE: Cutting punch for front door seat memory switch
13. 12 = 0496636  Nut
    NOTE: as an alternative for 51 4 106 with tight packaging space
14. 13 = 0496783  Die-plate

    Note: