11 65 010 Removing and Installing/Replacing Vacuum Reservoir (N63O1)

Necessary Preliminary Tasks: 

• Remove Both Exhaust Turbochargers. See RIGHT TURBO (CYLINDERS 1-4)  and LEFT TURBO (CYLINDERS 5-8) .
• Remove Both Exhaust Manifolds. See LEFT EXHAUST MANIFOLD and RIGHT EXHAUST MANIFOLD .
• Remove HEAT SHIELD AT BOTTOM .

Release Vacuum Line (3).

Release Screws (1).

Tightening torque: 11 65 10AZ .

Remove Vacuum Reservoir (2).

Fig 1: Identifying Vacuum Reservoir, Vacuum Line and Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble Engine.

Check Vacuum Connections.

Observe BMW Diagnosis Instructions.

1. Complete Vehicle
2. Power Train
3. Engine Electrical System
4. Air Supply
5. Charging Pressure Control