11 33 054 Removing and Installing/Replacing Rocker Arms On Right Side (N63)

Special Tools Required: 

• 11 4 480 .

  (Cylinder Bank 1 To 4) 

Necessary Preliminary Tasks: 

• Remove INLET AND EXHAUST ADJUSTMENT UNIT  On Right Side.
• Remove Right INLET CAMSHAFT .
• Remove Right EXHAUST CAMSHAFT .

Remove Rocker Arm (1) and Set Down In Neat Order In Special Tool 11 4 480 .

Install Rocker Arm (1).

Align All Rocker Arms (1) Straight.

Fig 1: Identifying Rocker Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble Engine.