11 12 112 Replacing Both Cylinder Head Gaskets (N63)

Necessary Preliminary Tasks:

Installation Note:

The Cylinder Head Gasket (2) for Cylinders 1-4 and Cylinders 5-8 Are Identical.

There Is No Marking (Top).

Cylinder Head Gasket (2) Must Depending On Its Styling Be Correctly Positioned On The Timing Chain Case.

Fig 1: Identifying Fitting Sleeves and Cylinder Head Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Repair Gasket (+Rep) Is 0.3 Mm Thicker.

Check Cylinder Head for SURFACE EVENNESS .

Fig 2: Identifying Thicker Cylinder Head Gasket (+Rep)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble Engine.