51 16 190 Removing and installing/replacing lock cylinder in center armrest

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Open both center console armrests.

Carefully lift off cover (1) by hand.

Fig 1: Identifying Center Console Armrests Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Insert key (1) in lock cylinder (2).

Lever out lock barrel (2) with screwdriver (3) upwards.

Fig 2: Inserting Key In Lock Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement 

Assemble new LOCK BARREL  according to the encoding.