26 20 000 Removing and installing front propeller shaft
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
IMPORTANT:
On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of.
- See ADDITIONAL WORK when replacing propeller shaft
Necessary preliminary tasks:
- Remove UNDERBODY PROTECTION and retaining plate on left.
- Remove holder for exhaust system from gearbox.
Tightening torque:
N55 Engine see 18 20 1AZ
N63 Engine see 18 20 1AZ
Release screws.
Tightening torque 26 11 7AZ .
Installation note:
Replace ZNS bolts.
Release screws.
Tightening torque 26 11 7AZ .
Remove propeller shaft.
Installation note:
Replace ZNS bolts.