63 31... Removing and installing/replacing fiber optic conductor of door panel, top rear

Special tools required:

WARNING: Fiber optic conductors are sensitive (risk of damage). Always handle carefully.

Necessary preliminary tasks:

Carefully detach fiber optic conductor (1) from LED module (3) (retainer).

Installation:

LED-module (3) must lock into position (light distribution).

Fig 1: Detaching Fiber Optic Conductor From LED Module (Retainer)

Courtesy of BMW OF NORTH AMERICA, INC.

Upper fiber optic conductor

Use special tool 64 1 020 to unclip fiber optic conductor (3) from retaining clips (1) in door panel (2) and remove.

Installation:

The fiber optic conductor (3) must be securely locked in the retaining clips (1) on the door trim panel (2).

Fig 2: Identifying Trim Panel, Fiber Optic Conductor, And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check fiber optic conductor (1) for damage (scratches or cracks), replace if necessary.

Fig 3: Identifying Fiber Optic Conductor

Courtesy of BMW OF NORTH AMERICA, INC.