51 24 133 Removing and installing/replacing drive for Soft Close Automatic on rear lid (top) (soft closure aid)

Necessary preliminary tasks: 

• Partially remove REAR SPARE WHEEL WELL TRIM PANEL  (rear expanding rivets)

Unclip (2) drive (3).

Disconnect plug connection (1) and disengage at lock actuator.

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable at counter support (1) and lock lever (2) of luggage compartment lock (rear lid, top).

Fig 2: Identifying Counter Support And Lock Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Perform function check with lower rear lid open.