51 16 164 Replacing cover for rear center console

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks:

Release screws and modify fresh air grille (1).

Detach storage compartment (2) and modify.

Remove left and right decorative trim in the marked area (3) and modify.

Installation:

Check that fiberglass lines in decorative trim are properly clipped on. Install decorative trims flush. Retaining tabs and clips must not be damaged.

Fig 1: Identifying Screws, Fresh Air Grille And Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.