51 42 001 Replacing left or right rear door trim panel
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
Depending on equipment specification:
- Modify SWITCH FOR SIDE WINDOW OPERATION
- Modify FOOTWELL LIGHT
- Modify OPTICAL FIBRE DECORATIVE STRIP
- Modify BOTTOM OPTICAL FIBRE STORAGE COMPARTMENT
- Modify INSIDE DOOR OPENER
- Modify MID-RANGE SPEAKER
- Modify TWEETER
- Modify ROLLER SUNBLIND
Modify:
- Locking button trim (1).
- Retaining clips (2)
- Ashtray (3)
- Retaining clip (4)
- Handle (5)
Installation:
If optional optical fibre is fitted, break off pin (1) in map pocket (2) if necessary.