26 20 000 Removing and installing front propeller shaft

IMPORTANT: Do not move vehicle with engine power once propeller shaft has been removed.

IMPORTANT: On four-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of.

Necessary preliminary tasks :

Release screws (1).

Tightening torque: 26 11 7AZ .

Installation note :

Replace screws (1).

Fig 1: Propeller Shaft Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Tightening torque: 26 11 7AZ .

Remove propeller shaft.

Installation note :

Replace screws.

Fig 2: Propeller Shaft Screws

Courtesy of BMW OF NORTH AMERICA, INC.