51 24 131 Removing and installing/replacing left or right striker for tailgate catch

Release clamps (1).

Feed out trim panel (2) in direction of arrow.

Installation note: 

If necessary, replace faulty clips (1).

Fig 1: Removing Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove supports (2) and striker (3).

Tightening torque 51 24 2AZ .

Installation note: 

Adjust the STRIKER .

Fig 2: Checking Alignment Of Rear Lid And Striker

Courtesy of BMW OF NORTH AMERICA, INC.