51 61 011 Removing and installing/replacing V-strut, front axle support, left or right

IMPORTANT: Observe SAFETY INFORMATION for raising the vehicle
Driving without the trailing link is not permitted!

Necessary preliminary tasks:

Release screws (1).

Unfasten screws (2).

Tightening torque 51 71 6AZ .

Release screw (3).

Tightening torque 51 71 7AZ .

Pull the trim panel (4) downwards slightly.

Remove V-strut (5) towards front.

Installation note:

Replace screws.

Fig 1: Identifying V-Strut, Trim Panel, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.