11 23 010 Removing and installing/replacing vibration damper (N20, N26)

Special tools required :

Necessary preliminary tasks :

NOTE: Engine removed:

Block crankshaft with special tool 11 9 260 .

Fig 1: Securing Flywheel With Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Engine installed with manual transmission:

Block crankshaft with special tool 11 8 180 .

Fig 2: Blocking Crankshaft Using Special Tool (11 8 180)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Engine installed with automatic transmission:

Block crankshaft with special tool 22 2 742.

Feed in special tool, slide screw forward and tighten.

Fig 3: Blocking Crankshaft Using Special Tool (22 2 742)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove vibration damper.

Tightening torque 11 23 1AZ .

Fig 4: Identifying Vibration Damper Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.