11 53 082 Removing and installing cooling water feed line (N20, N26)

• Remove turbocharger. See REMOVING TURBOCHARGER (N20)  or REMOVING TURBOCHARGER (N26) .

Release screw (1).

Tightening torque: 11 53 3AZ .

Fig 1: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the coolant line (1) in direction of arrow.

Installation note  :

Replace O-ring.

Fig 2: Removing Vent Line

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.