11 61 365 Removing and installing/replacing left-hand charge air duct (N20, N26)

Necessary preliminary tasks :

Installation note :

Ensure locking clamps are correctly fitted.

Lock must engage.

Fig 1: Identifying Clamp In Locked And Unlocked Positions

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip line (1).

Unfasten plug connection (2) and disconnect.

Unlock snap fastener (3) and pull charge-air duct from throttle body.

Unlock tank ventilation line (4) underneath and disconnect.

Fig 2: Identifying Lines, Snap Fastener, And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock snap fastener (1) and remove the charge-air duct.

Fig 3: Identifying Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note :

Visually inspect the form sealing ring (1) for correct position and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 4: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.