REP-TAT-P-1128-02 Installing the drive belt for alternator
NOTE:
TECHNICAL INFORMATION
If the drive belt is reused: Mark the direction of rotation and reinstall the drive belt in same direction of rotation.
If the drive belt is reused: Mark the direction of rotation and reinstall the drive belt in same direction of rotation.
NOTE:
TECHNICAL INFORMATION
Replace drive belt if it is contaminated with coolant and oil residue.
Replace drive belt if it is contaminated with coolant and oil residue.
- Position the drive belt for alternator (1) on the ancillary components.
- Increase preload on belt tensioner.
- Remove special tool 0 496 268 (11 0 390) from belt tensioner.