REP-TAT-P-1151-02 Installing the electric coolant pump for the charge air cooler/air conditioning condenser

• Position electric coolant pump (2).
• Close the holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Tighten nut (2). 

TIGHTEN TORQUES SPECIFICATIONS

Electric coolant pump to holder
M6	Tightening torque	8 Nm

• Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION 
Make sure that the connections are locked correctly. The locks must engage audibly.

• Connect and lock the coolant hoses (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.