REP-TAT-P-1100-20-10 Attach the engine support beam to the vehicle

• Position the engine bridge with the help of an auxiliary person.
• Make sure that the engine support beam is properly positioned at the correct mounting points.

  Courtesy of BMW OF NORTH AMERICA, INC.

CAUTION: Components connected to the engine joint or cross member. 
Injury hazard! 

• Check lifting eyes and engine mounting brackets for damage, e.g. cracks.
• Attach the component to correctly mounted engine joints or cross members only.
• Only lift the component, do not shift it forwards, backwards or in transverse direction.

Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the chain with the hook (1) into the engine mounting bracket (2).
• Tighten all screws and nuts of the engine support beam!