LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - Repair (F30, 6-CYL AWD) >> Propeller Shaft, General Information >> 26 00 Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive

26 00 Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive

IMPORTANT: If the vehicle has been shifted under engine power with a non-engaging drive system (e.g. faulty front prop shaft, or one output shaft is no longer engaging with the drive flange, rear axle differential faulty/no power transmission), it is mandatory to calibrate the transfer box after having repaired the prop shaft/output shaft(s).

Carry out calibration after having completed the repair using the diagnostic system and information system, in control unit function -

Functional check - Transfer box.

scientia non olet · About LEMON Manuals