REP-TAT-P-1153-01 Remove heat management module

NOTE: Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.

• Unlock and disconnect connector (1).
• Unclip positive battery cable in area (2).
• Unlock and detach the coolant hoses (3) and (4).
• Loosen clamp (5) and detach the coolant hose.

Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1) to (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Feed out the heat management module (1) to the outside rear out of the component carrier.

Courtesy of BMW OF NORTH AMERICA, INC.