REP-TAT-P-1141-03 Install the oil vacuum pump

Check 

• Check the correct position of the lining sleeves (1) and whether or not they are damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Lining sleeves (1) are damaged or missing.

Measure

• Replace the lining sleeves (1).

• Replace sealing ring (1).

Parts:  Sealing ring

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert oil vacuum pump (1) into the drive chain (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the oil vacuum pump (2) correctly on the fitting sleeves.
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.