REP-TAT-P-1112-01 Removing the acoustic cover

NOTE: RISK OF DAMAGE 
Damage to the acoustic cover. 
Jerky movements during disassembly and excessive application of force during installation may result in breakage of the acoustic cover. 

• Disassemble or mount the acoustic cover carefully.
• Disassemble or mount snap-lock couplings of the ball pivots one after the other.
• Disassemble or mount acoustic cover only at temperatures >20 °C.
• Use only distilled water as an auxiliary material during installation, no lubricants.

• Release the acoustic cover 1  upwards out of the rubber mounts (markings).

Courtesy of BMW OF NORTH AMERICA, INC.