REP-TAT-P-1153-01 Remove connecting bracket on the engine block

• Unlock coolant hose (1) and detach.

Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip the wiring harness from the clamp (1) at the connecting bracket.
• Loosen hose clamp (2) and detach the coolant hose.

Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect connector (1).
• Remove connecting brackets (2).

Courtesy of BMW OF NORTH AMERICA, INC.