REP-TAT-P-1136-02 Install VANOS central valve of the intake side
VANOS central valves
Overview graphic of the VANOS central valves
8 617 694 - Short VANOS central valve
7 620 689 - Long VANOS central valve
8 695 709 - VANOS central valve (increased leakage) (TZV)
8 696 446 - VANOS central valve (low leakage) (TZV
NOTE:
After replacing one or more VANOS central valves or VANOS adjusters:
When removing, make note of the identification/part number of the VANOS central valve or VANOS adjuster and consider writing it down.
It must be replaced with a VANOS adjuster or VANOS central valve with the same part number. A mixed installation is not allowed.
Read out the vehicle I-level and proceed accordingly.
Be absolutely certain to pay attention to PuMA measure 64122020.
For further information, see the applicable BMW Parts Catalogue.
When removing, make note of the identification/part number of the VANOS central valve or VANOS adjuster and consider writing it down.
It must be replaced with a VANOS adjuster or VANOS central valve with the same part number. A mixed installation is not allowed.
Read out the vehicle I-level and proceed accordingly.
Be absolutely certain to pay attention to PuMA measure 64122020.
For further information, see the applicable BMW Parts Catalogue.
- Mount and abut VANOS central valve (1) of intake side.