LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 335i Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Self Diagnosis - Diagnostic Trouble Codes (N20 & N26)) >> Fault Code Tests >> DTC P15DE: BMW DTC 11AC01; DME -- Cold Start Fuel Pressure Too High (Bank 1) >> Fault description

Fault description

WARNING: This page does not describe the selected car, but rather 59 other vehicles, including the 2018 BMW X4, 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW X4, and 2017 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Diagnosis monitors high pressure in the fuel system during the heating phase of the catalytic converter.

Fault monitoring conditions:

This fault code is detected whenever pressure in the high-pressure fuel line is above its setpoint value.

scientia non olet · About LEMON Manuals