LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 335i Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Self Diagnosis - Diagnostic Trouble Codes (N20 & N26)) >> Fault Code Tests >> DTC P2195: BMW DTC 128101; DME -- O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 1) >> Fault description

Fault description

WARNING: This page does not describe the selected car, but rather 59 other vehicles, including the 2018 BMW X4, 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW X4, and 2017 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Diagnosis monitors the voltage of the oxygen sensor before catalytic converter and compares this to the voltage of the oxygen sensor after catalytic converter.

Fault monitoring conditions:

The fault is detected if the air ratio of the oxygen sensor before catalytic converter deviates too much from the air ratio of the oxygen sensor after catalytic converter.