LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> 335i Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Self Diagnosis - Diagnostic Trouble Codes (N20 & N26)) >> Fault Code Tests >> DTC P142E: BMW DTC 110001; DME -- Cylinder Injection Cut-Off, Pressure Too Low In High-Pressure System (Bank 1) >> Fault description

Fault description

WARNING: This page does not describe the selected car, but rather 59 other vehicles, including the 2018 BMW X4, 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW X4, and 2017 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Diagnosis monitors the high-pressure fuel system for pressure deviations.

Fault monitoring conditions:

The fault is detected when the fuel pressure drop below a map-dependent value in the high-pressure fuel system and/or in the low-pressure fuel system and the oxygen sensor control factor exceeds the upper threshold value.

scientia non olet · About LEMON Manuals