Action in service
WARNING: This page does not describe the selected car, but rather 59 other vehicles, including the 2018 BMW X4, 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW X4, and 2017 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Secondary faults: If additional diagnostic fault codes related to malfunctions in the following components have been logged, process these problems first:
- Mixture control.
- VANOS.
- Tank ventilation system.
- Ignition.
- Injectors.
- Crankshaft sensor.
- Camshaft sensor.
- Electromotive throttle controller.
- Hot film air mass meter.
- Check exhaust system of oxygen sensor after catalytic converter for tightness.
Check wiring harness between DME and oxygen sensor before catalytic converter.
Check wiring harness between DME and oxygen sensor after catalytic converter.
Replace oxygen sensor before catalytic converter.
Renew oxygen sensor after catalytic converter.