Removing and installing/replacing both windscreen wiper arms
Special tools required:
- 61 6 060
IMPORTANT:
After installation Check Setting Dimension And Contact Angle. Refer to CHECKING/ADJUSTING CONTACT ANGLE OF WINDSCREEN WIPER ARMS ON WINDSCREEN or CHECKING CONTACT ANGLE OF WIPER ON LEFT OR RIGHT (SERIES P L7) of the wiper arm.
Remove protective cap (1).
Release nut underneath.
Tightening torque 61 61 2AZ .
IMPORTANT:
Risk of breakage!
Do not bend wiper arm when removing.
Detach windscreen wiper arm with special tool 61 6 060.