Connecting the negative battery cable
NOTE:
TECHNICAL INFORMATION
For additional information see:
SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY
NOTES FOR DISCONNECTING AND CONNECTING THE VEHICLE BATTERY ,
NOTES ON INTELLIGENT BATTERY SENSOR (IBS)
For additional information see:
SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY
NOTES FOR DISCONNECTING AND CONNECTING THE VEHICLE BATTERY ,
NOTES ON INTELLIGENT BATTERY SENSOR (IBS)
- Connect negative battery cable with intelligent battery sensor (IBS) (2) to negative battery terminal.
- Tighten nut (1).
TIGHTENING TORQUE SPECIFICATIONS
| Negative battery terminal (with IBS) | |
| Nut M6 | 5 Nm |
Follow-up work
- Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
- Refer to INSTALLING THE FLAP IN THE RIGHT LUGGAGE COMPARTMENT TRIM PANEL .