Draining the engine oil
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
WARNING:
Hot fluids.
Risk of scalding!
Risk of scalding!
- Conduct all work in the vehicle wearing appropriate personal protective equipment only.
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Opening the oil filler cap
- Open oil filler cap (1).
- Rotate the closure (1).
- Open the service cap (2).
- Release oil drain plug (1).
- Drain engine oil.
- Replace the sealing ring.
Parts: Sealing ring
- Tighten oil drain plug (1).
TIGHTENING TORQUE SPECIFICATIONS
| Oil drain plug | |
|---|---|
| M12x16 Replace the sealing ring. |
25 Nm |
- Close the service cap (2) and lock with the lock (1).