Remove heat management module

Preliminary work 

• Refer to REMOVING DESIGN COVER .
• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING INTAKE SILENCER HOUSING .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
• Refer to REMOVING BOTH COOLANT EXPANSION TANKS .
• Refer to REMOVING CHARGE AIR LINE .
• Refer to REMOVING ACOUSTIC COVER AT FRONT .

• Unlock and disconnect connector (1). 
• Unlock and detach the coolant hoses (2)  and (3). 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws in the order (6)  to (1). 
  Fig 1: Heat Management Module Screws Loosening Sequence

  Courtesy of BMW OF NORTH AMERICA, INC.
• Remove the heat management module (1). 

Courtesy of BMW OF NORTH AMERICA, INC.