Removing and installing/replacing support for left or right outer door handle with lock barrel

Necessary preliminary work: 

• Close side window if necessary
• Remove OUTER DOOR HANDLE ON FRONT DOOR .
• Release SOUND INSULATION  of the front door in rear part

Remove seals (1) in direction of arrow.

Release screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release cable clip from support (1).

Remove inner support (1) in direction of arrow and feed out of door.

Courtesy of BMW OF NORTH AMERICA, INC.

For version with Comfort Access/light package: 

Release cable clip (1) from support (2).

Disconnect plug connection (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Release sound cover (1) at clips (2) and maneuver out of support (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Unclip Bowden cable (1) in area (A) and maneuver out of support (2).

Installation note: 

Ensure that the Bowden cable (1) is correctly routed at support (2).

For version with Comfort Access/light package: 

Modify OUTSIDE DOOR HANDLE LIGHT ON FRONT DOOR .

Courtesy of BMW OF NORTH AMERICA, INC.