Removing and installing/replacing footwell light

Footwell, left/right: 

Lever footwell light (1) in direction of arrow out of trim panel (2).

Disconnect plug connection behind and remove footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Door, left/right: 

Lever footwell light (1) in direction of arrow out of door trim panel (2).

Disconnect plug connection behind and remove footwell light (1).

Replacement:

• If necessary, remove bulb, note BULB TYPE .

The footwell light in LED technology must be completely replaced! 

Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb holder (1) in direction of arrow and pull out of footwell light (2).

Installation note: 

Make sure bulb holder (1) is correctly seated and latched on footwell light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Pull bulb (1) in direction of arrow out of bulb holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.