Replacing halogen bulb for high beam headlight on left
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
NOTE:
Work shown on the F30 by way of example, deviations in detail are possible in other models.
Turn protective cap (1) in direction of arrow and remove in upward direction.
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Seal in protective cap (1) must not be missing or damaged.
Replace protective cap (1) if necessary.
Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must be correctly engaged.
Pull bulb holder (1) in direction of arrow out of headlight (2).
Installation note:
Make sure bulb holder (1) is correctly seated in headlight (2).
Detach bulb holder (1) from bulb (2).
Installation note:
Note BULB TYPE .