Replacing bulb for turn indicator, front left

Unlock and remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb holder (1) in direction of arrow and remove from headlight (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Check seal. Replace bulb holder (1) if necessary.

Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .

Turn bulb holder (1) clockwise to limit position.

Bulb holder (1) must lock correctly.

21W version: 

Pull bulb (1) in direction of arrow out of bulb holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Note BULB TYPE .

Type PY24W: 

Turn bulb with socket (1) in direction of arrow and remove from bulb holder (2) toward the top.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Check that bulb with socket (1) and sealing ring (3) on bulb holder (2) are correctly seated.

Note BULB TYPE .