Replacing bulb for side lights, front left
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
NOTE:
Work shown on the F30 by way of example, deviations in detail are possible in other models.
Turn protective cap (1) counterclockwise and remove.
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Check seal. Replace protective cap (1) if necessary.
Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must lock correctly!
Turn protective cap (1) clockwise to limit position.
Firstly turn bulb holder (1) left and then pull out of headlight in direction of arrow.
Installation note:
Make sure bulb holder (1) is exactly seated in headlight.
NOTE:
Similar to graphic.
Firstly turn bulb for side lights (1) in direction of arrow and then pull out of bulb holder.
Installation note:
Note BULB TYPE .