Replacing bulb for daytime driving lights, left

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Turn protective cap (1) counterclockwise and remove.

IMPORTANT: Risk of damage due to moisture penetration!

Installation note:

Check seal. Replace protective cap (1) if necessary.

Protective cap (1) must lock correctly!

Turn protective cap (1) clockwise to limit position.

Courtesy of BMW OF NORTH AMERICA, INC.

Pull back bulb holder (1) in direction of arrow out of headlight.

Installation note:

Make sure bulb holder (1) is exactly seated in headlight.

Courtesy of BMW OF NORTH AMERICA, INC.

Pull bulb for daytime driving lights (1) out of bulb socket (2).

Installation note:

Courtesy of BMW OF NORTH AMERICA, INC.