Removing and installing/replacing LED for left or right door post trim panel

Necessary preliminary tasks:

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Unlock and disconnect plug connection (1) on door post.

Lever out cable at cable clip (2) from door post.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.
Graphic shows trim panel (3) removed.

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lever out LED module (1) from holder (2) with a suitable tool.

Lever out cable at cable clip (4) from trim panel (3) and remove LED module (1).

Installation note:

Make sure LED module (1) is correctly fitted in holder (2).

Cable clips (4) must not be missing or damaged.

Ensure correct cable routing.