Replacing the LED module for left daytime Driving lights

Removal: 

Release screws (1).

Remove the LED module (2) from the headlight to the top.

Unlock and disconnect corresponding connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

The seal (1) on the LED module (2) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect associated connector.

Position LED module (2) in the headlight.

Tighten down screws (1).

Tightening torque 63 11 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Carry out PROGRAMMING/ENCODING .