Removing and installing/replacing head-up display

Attention!

Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Attention!

Comply with notes and notes on HANDLING OPTICAL FIBRES .

Risk of damage!

Do not scratch glass pane of head-up display.

Necessary preliminary tasks:

Remove INSTRUMENT PANEL TRIM .

NOTE: Similar to graphic.

Remove seal (1) from head-up display (2).

Loosen screws (3).

Tightening torque 62 30 1AZ .

Carefully feed out head-up display (2) in upward direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) on underside of head-up display (2) and disconnect.

Remove head-up display (2).

Installation note:

Clean the glass pane of the Head-Up Display.

Adjust HEAD-UP DISPLAY .

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

NOTE: When replacing the Head-Up Display in vehicles with production date up to 03/2017 it is necessary to program the instrument cluster. See ENCODE/PROGRAM CONTROL UNIT(S) .